英语论文网

Module Partition Research for the Marine Drilling Rig
Key words: module, module partition, marine drilling rig, modular division scheme
代写留学生毕业论文Abstract. The modular design principle is that much more products are composed by fewness module, and the products should be stable, and have high precision, simple structure, and also lower cost based on the customer requirements, therefore, dividing and treating the level, size and number of the module scientifically and reasonably is an important guarantee for the successful modular design. And now the modular design, for the marine work-over rig, and scientifically rational module partition scheme are offered based on the principle and theory of the module design and module division.
Introduction
1 The Module Partition Method for the Mechanical Product
2．Principle of dividing the module for the drilling rig and general layout design
2.1 principle of dividing the module
2]

 
Fig. 1 Generalized module partition process

2.2 Entire allocation design
1) Drilling rig equipment module
2) The support module of work over rig

 
Fig. 2 Modular shorts overall layout diagram

3）Power module
It mainly includes generator, fuel oil tank, slip oil tank, house on duty, extinguishing pry and so on. The arrangement form can be independent, also can be decorated with drilling supporting module layout, depending on that the power module is moving or not.  
4）Bulk material storing module
Independent and the hanging of two kinds module structure form is often used in marine work over rig P – TANK.
5）The intervene problem may be occurred in the upper blocks
The drilling rig module is fixed on the top block, which inevitably exist some mutual influence for the arrangement, and which will be aware of as flows:
3. The module division method for the marine drilling rig
3.1 Dividing module based on the weight
3.2 According to the correlation structure into modules
3.3 According to the function module partition integrity
1). Flow series standards
2). Flow parallel guidelines

Fig.3 The building process for the module drilling rig

3). Flow convert standards
 
Fig. 4 The function module for the module drilling rig
4. Summary and recommendations
References
[1] Ding Feng, The status and development trend of modularized drilling rig, China Petroleum Machinery, 09(2008).
[2] ZHONG Weihong,https://www.51lunwen.org
 The Partition and Planning of the Hydraulic Press Based-on the Generalized Modularization Rapid Design, 01(2004).
[3] Xu Tiantian; Structure design of ocean-module drilling machine for XiJiang 23-I oil filed, Ship & Boat, 05(2006).
[4] ZHENG Qing-chun, Model of Mechanical Product CAD/CAPP Based on Flexible Module, Modular Machine Tool & Automatic Manufacturing Technique .02 (2008).
[5] Ding Feng, Discussion on Module Division for Light Removable Offshore Drilling Platform, Oil Field Equipment, 02(2010).